SYT65/E SERIES

  • SYT65/2E

SYT65/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 80 PN 16

OUTPUT FLANGE

:

DN 65 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER
INPUT OUTPUT W
mm
L
mm
H
mm
KG m³/h 35 70 80 90
SYT65/2E 37 380 50 2900 2 4" 395 554 395 93 Hm 100 91 88 84
SYT65/3E 55 380 50 2900 3 4" 395 625 395 116 150 142 138 137
SYT65/4E 75 380 50 2900 4 4" 395 696 395 138 190 175 166 160
SYT65/5E 90 380 50 2900 5 4" 395 767 395 161 240 218 210 200
SYT65/6E 110 380 50 2900 6 4" 395 838 395 183 290 260 250 240
SYT65/7E 110 380 50 2900 7 4" 395 909 395 206 340 302 290 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








sumak@sumakpompa.com

0262 502 50 10