SYT50/E SERIES

  • SYT50/2E

SYT50/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 65 PN 16

OUTPUT FLANGE

:

DN 50 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER
INPUT OUTPUT W
mm
L
mm
H
mm
KG m³/h 35 40 45 50
SYT50/2E 15 380 50 2900 2 3" 2" 330 493 370 80 Hm 72 65 60 50
SYT50/3E 18,5 380 50 2900 3 3" 2" 330 560 750 98 95 87 80 75
SYT50/4E 22 380 50 2900 4 3" 2" 330 627 370 116 120 110 100 85
SYT50/5E 30 380 50 2900 5 3" 2" 330 694 370 134 157 150 145 139
SYT50/6E 37 380 50 2900 6 3" 2" 330 761 370 152 200 192 182 170
SYT50/7E 45 380 50 2900 7 3" 2" 330 828 370 170 238 230 218 205
SYT50/8E 55 380 50 2900 8 3" 2" 330 895 370 188 268 260 250 236
SYT50/9E 75 380 50 2900 9 3" 2" 330 962 370 206 320 310 298 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








sumak@sumakpompa.com

0262 502 50 10