Package Booster In the market, only Sumak pumps, booster components, non-Sumak and package boosters are designed and products are sold with the Sumak booster code. Package boosters without a Sumak certificate are definitely out of warranty and will not be installed by our authorized services. We kindly ask you to pay attention to the fact that the products you have purchased are Sumak certified factory-exported water booster. Sumak pump package booster sets are delivered ready to be operated, mostly suitable for domestic use, and package system shipments are made. We have a wide product selection in the products that we manufacture as silent booster for this type of products, This type of package booster, which is mostly suitable for use as sumak pump home type booster, small building booster and villa booster, is guaranteed for 2 years. Booster system Turkey manufacturers.

SMJH 85

SMINOX H 150/4

SYMH 8

Package Boosters

The working type of the booster  is the name given to the pumps that are automatically activated when the mains water is insufficient. It pressurizes the water in the water tank with the impellers of the pumps and pumps it to the far point, in short, this is the working principle. The selection of the booster pump should be completely tailored to the needs; It should be able to give the pressure to the water to go to the desired place. The booster is not only a system consisting of a water tank and a pump, but also has auxiliary elements mounted. We can count these auxiliary elements as follows; Expansion Tank, Manometer, Check Valve, Ball Valve, Pressure Switch, Control Panel and Water Level Floater.

The ball valve is used to cut off the water flow to the booster.

check valve; In the event of a decrease in pressure, it prevents the water flow from going in the opposite direction.

Pressure Switch; It regulates the operation of the pump according to the pressure in the installation. There are 2 types as pressure switch with discharge and pressure switch without discharge.

The pressure switch used in boosters is a pressure switch without discharge. The discharge pressure switch is mostly used in air compressors.

Expansion Tank ; Since water is an incompressible fluid, it compresses the air thanks to the membrane in the tank, causing the pump to stop. Check the booster tank regularly, especially the air settings. It is useful to perform a check-up every 2 or 3 months. The air inside can be discharged, which paves the way for many possible malfunctions. For this reason, it is useful to regularly check the booster tank.

Control panel ; It is a panel that provides electrical protection for the pump, which contains elements such as contactor, thermal, phase protection relay, to provide longer service life.

Water Level Floater ; This part, also known as the float, controls the water condition in the tank where the pump sucks and prevents the pump from running without water.

If we explain the working principle of the booster produced by turkish package booster manufacturers ; pressure switch sends the necessary signal to the control panel for the pump to operate for the desired pressure in the installation. If the necessary conditions for the operation of the pump are met, the control panel starts the pump by starting it. When there is no use left in the building, when the pressure switch in the installation reaches the desired upper pressure level, the signal sent to the control panel to stop the booster is cut off and the pump goes into standby mode. When water usage starts in the building, the booster pump is activated again when the pressure value in the installation reaches the lower value of the pressure switch.

Regarding the installation of package booster set , Users may frequently encounter questions and problems such as the booster works constantly, the booster does not activate, the flow rate decreases, the booster does not flood, the engine is overloaded, the booster is activated too often, the booster vibrates, and so on. Thanks to timely pump maintenance, these problems will be completely eliminated. When faced with such a problem, be sure to read the instructions in the user manual and consult the authorized services.

Regarding the selection of package booster set , There are some points that you should pay attention to when buying a booster; the number of flats and the height of the building, the location of the warehouse, the horizontal and vertical pipes in the building installation, the friction coefficient of the water in the water installation, the water supply for how many flats, the distance between the flats to be installed and the flats to be fed, etc. These details are important for choosing the right booster and provide long-term usefulness.

Package booster sets  manufactured by turkish package booster producers generally consist of centrifugal pump and booster equipment mounted on an expansion tank. The booster is shipped ready for operation. Package boosters are generally manufactured with expansion tanks from 25 liters to 100 liters. Package water booster, mini booster, small booster, villa booster, home booster, school booster, building booster, hospital booster, residential booster, 2 floor 2 flat booster, 8 floor to 24 flat, factory and mass housing systems. Package booster sound level is below 84 db.

Turkey package hydrophot manufacturer / Turkey hydrophor system manufacturer / package hydrophor systems / turkey package hydrophor / Turkey package booster set manufacturer / Turkey water pump spares manufacturer / turkey hydrophor spare parts manufacturer / water pump spare part manufacturer / turkey quality water pump spare parts manufacturers /

Read more