Products

We are able to manufacture the impellers of our 2900 RPM horizontal stage products that we have manufactured, in different stages between 0.75 - 110 KW, as chrome, bronze, steel casting and Noryl.

This type of water pump, which has a rich usage area, is suitable for the use of clean water in agricultural irrigation, treatment systems and industrial sector requiring high pressure, and can be custom made in our production.

SYM8-220/6 - SYT8-220/6 - SYT8-300/6 - SYT-400/10

  • SYM8-220/6

SYM8-220/6 - SYT8-220/6 - SYT8-300/6 - SYT-400/10

DESCRIPTION

Stainless body, horizontal shaft stage pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These types of pumps using up to maximum 135 m height pressured water for irrigation agricultural and drip page, for water booster in in industrial plants, treatment plants, garden sprinkler systems, water parks, gasoline and car wash stations.

MATERIAL SPECIFICATIONS

PUMP BODY

:

AISI 304 INOX

IMPELLER

:

NORLY

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C

PROTECTION CLASS

:

IP 54

ISOLATION

:

CI.F

MECHANICAL SEAL

:

SERAMİK / KARBON

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW HP V
Single		 V
​Three		 Hz A
Single		 A
Three		 rpm CAPACITOR
µf		 CAPACITOR
Vc		 INPUT
OUTPUT		 W
mm		 L
mm		 H
mm		 KG m³/h 1 3 5 6 7
SYM8-220/6
SYT8-220/6		 1,6 2,2 220 380 50 10 4,8 2900 45 450 1¼
1¼		 205 528 240 24,5 Hm 84 74 55 45 30
SYT8-300/8 2,2 3 - 380 50 - 5,4 2900 - - 1¼
1¼		 195 534 240 25,5 105 92 70 55 35
SYT8-400/10 3 4 - 380 50 - 6,4 2900 - - 1¼
1¼		 195 540 240 28 128 110 80 62 40







SYM12-220/4 - SYT12-220/4 - SYT12-300/6 - SYT12-400/7

  • SYM12-220/4

SYM12-220/4 - SYT12-220/4 - SYT12-300/6 - SYT12-400/7

DESCRIPTION

Stainless body, horizontal shaft multi-stage pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These types of pumps using up to maximum 95 m height pressured water for irrigation agricultural and drip page, for water booster in in industrial plants, treatment plants, garden sprinkler systems, water parks, gasoline and car wash stations.

MATERIAL SPECIFICATIONS

PUMP BODY

:

AISI 304 INOX

IMPELLER

:

NORLY

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C

PROTECTION CLASS

:

IP 54

ISOLATION

:

CI.F

MECHANICAL SEAL

:

SERAMİK / KARBON

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW HP V
Single		 V
​Three		 Hz A
Single		 A
Three		 rpm CAPACITOR
µf		 CAPACITOR
Vc		 INPUT
OUTPUT		 W
mm		 L
mm		 H
mm		 KG m³/h 2 4 6 8 10
SYM12-220/4
SYT12-220/4		 1,6 2,2 220 380 50 11 5,5 2900 45 450 1¼
1¼		 205 526 240 24 Hm 57 53 50 43 32
SYT12-300/6 2,2 3 - 380 50 - 5,7 2900 - - 1¼
1¼		 195 534 240 25 78 72 63 53 38
SYT12-400/7 3 4 - 380 50 - 6,4 2900 - - 1¼
1¼		 195 595 235 27 92 88 78 65 48







SYT32 SERIES

  • SYT32

SYT32 SERIES

DESCRIPTION

Horizontal shaft multi-stage casting pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 40 PN 16

OUTPUT FLANGE

:

DN 32 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 6 8 10 12 16
SYT32/2 4 380 50 2900 2 1½ 1¼ 285 520 284 45 Hm 48 47 46 44 35
SYT32/3 5,5 380 50 2900 3 1½ 1¼ 285 563 284 53 73 72 70 65 52
SYT32/4 5,5 380 50 2900 4 1½ 1¼ 285 606 284 62 98 95 91 86 68
SYT32/5 7,5 380 50 2900 5 1½ 1¼ 285 649 284 69 123 120 115 110 85
SYT32/6 11 380 50 2900 6 1½ 1¼ 285 692 284 76 147 145 139 130 106
SYT32/7 11 380 50 2900 7 1½ 1¼ 285 735 284 84 162 152 150 140 125
SYT32/8 11 380 50 2900 8 1½ 1¼ 285 778 284 92 180 175 162 155 135
SYT32/9 15 380 50 2900 9 1½ 1¼ 285 821 284 100 205 200 188 180 155
SYT32/10 15 380 50 2900 10 1½ 1¼ 285 864 284 108 230 223 213 205 176
SYT32/11 18,5 380 50 2900 11 1½ 1¼ 285 907 284 118 250 245 229 220 185
SYT32/12 18,5 380 50 2900 12 1½ 1¼ 285 950 284 128 275 263 261 250 215

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT40 SERIES

  • SYT40

SYT40 SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 50 PN 16

OUTPUT FLANGE

:

DN 40 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 10 15 20 25 30
SYT40/2 7,5 380 50 2900 2 2" 1½ 335 536 336 55 Hm 55 52 50 48 42
SYT40/3 11 380 50 2900 3 2" 1½ 335 591 335 65 85 82 80 78 72
SYT40/4 15 380 50 2900 4 2" 1½ 335 646 335 75 115 112 110 108 102
SYT40/5 18,5 380 50 2900 5 2" 1½ 335 701 335 85 145 142 140 138 132
SYT40/6 22 380 50 2900 6 2" 1½ 335 756 335 96 175 172 170 168 162
SYT40/7 30 380 50 2900 7 2" 1½ 335 811 335 106,5 205 202 200 198 192
SYT40/8 30 380 50 2900 8 2" 1½ 335 866 335 118 235 232 230 228 222
SYT40/9 37 380 50 2900 9 2" 1½ 335 921 335 129,5 265 262 260 258 252
SYT40/10 45 380 50 2900 10 2" 1½ 335 976 335 141 295 292 290 288 282
SYT40/11 45 380 50 2900 11 2" 1½ 335 1031 335 153,5 325 322 320 318 312
SYT40/12 55 380 50 2900 12 2" 1½ 335 1086 335 165 355 352 350 348 342

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT50 SERIES

  • SYT50

SYT50 SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 65 PN 16

OUTPUT FLANGE

:

DN 50 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 35 40 45 50
SYT50/2 15 380 50 2900 2 2½ 2" 350 581 350 94 Hm 72 65 60 50
SYT50/3 18,5 380 50 2900 3 2½ 2" 350 643 350 112 95 87 80 75
SYT50/4 22 380 50 2900 4 2½ 2" 350 705 350 130 120 110 100 85
SYT50/5 30 380 50 2900 5 2½ 2" 350 767 350 148 157 150 145 139
SYT50/6 37 380 50 2900 6 2½ 2" 350 829 350 166 200 192 182 170
SYT50/7 45 380 50 2900 7 2½ 2" 350 891 350 166 238 230 218 205
SYT50/8 55 380 50 2900 8 2½ 2" 350 953 350 203 268 260 250 236
SYT50/9 75 380 50 2900 9 2½ 2" 350 1015 350 222 320 310 298 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT65 SERIES

  • SYT65

SYT65 SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 80 PN 16

OUTPUT FLANGE

:

DN 65 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 60 70 80 90
SYT65/2 37 380 50 2900 2 3" 2½ 395 644 395 110 Hm 100 91 88 84
SYT65/3 55 380 50 2900 3 3" 2½ 395 715 395 132 150 142 138 137
SYT65/4 75 380 50 2900 4 3" 2½ 395 786 395 154 190 175 166 160
SYT65/5 90 380 50 2900 5 3" 2½ 395 857 395 176 240 218 210 200
SYT65/6 110 380 50 2900 6 3" 2½ 395 928 395 198 290 260 250 240
SYT65/7 110 380 50 2900 7 3" 2½ 395 999 395 220 340 302 290 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT80 SERIES

  • SYT80

SYT80 SERIES

DESCRIPTION

Horizontal shaft multi-stage casting pumps It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 100 PN 16

OUTPUT FLANGE

:

DN 80 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 100 120 140 160
SYT80/2 55 380 50 2900 2 4" 3" 475 766 475 152 Hm 108 100 90 80
SYT80/3 90 380 50 2900 3 4" 3" 475 849 475 183 157 147 135 125
SYT80/4 110 380 50 2900 4 4" 3" 475 932 475 214 205 191 175 160

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT32/E SERIES

  • SYT32/2E

SYT32/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 40 PN 16

OUTPUT FLANGE

:

DN 32 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 6 8 10 12 16
SYT32/2E 4 380 50 2900 2 2" 1¼ 260 416 297 45 Hm 48 47 46 44 35
SYT32/3E 5,5 380 50 2900 3 2" 1¼ 260 464 297 53 73 72 70 65 52
SYT32/4E 5,5 380 50 2900 4 2" 1¼ 260 512 297 61 98 95 91 86 68
SYT32/5E 7,5 380 50 2900 5 2" 1¼ 260 560 297 69 123 120 115 110 85
SYT32/6E 11 380 50 2900 6 2" 1¼ 260 608 297 77 147 145 139 130 106
SYT32/7E 11 380 50 2900 7 2" 1¼ 260 656 297 85 162 152 150 140 125
SYT32/8E 11 380 50 2900 8 2" 1¼ 260 704 297 93 180 175 162 155 135
SYT32/9E 15 380 50 2900 9 2" 1¼ 260 752 297 101 205 200 188 180 155
SYT32/10E 15 380 50 2900 10 2" 1¼ 260 800 297 109 230 223 213 205 176
SYT32/11E 18,5 380 50 2900 11 2" 1¼ 260 848 297 117 250 245 229 220 185
SYT32/12E 18,5 380 50 2900 12 2" 1¼ 260 896 297 125 275 263 261 250 215

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT40/E SERIES

  • SYT40/2E

SYT40/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 50 PN 16

OUTPUT FLANGE

:

DN 40 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 10 15 20 25 30
SYT40/2E 7,5 380 50 2900 2 2½ 1½ 260 440 305 51 Hm 55 52 50 48 42
SYT40/3E 11 380 50 2900 3 2½ 1½ 260 495 305 61 85 82 80 78 72
SYT40/4E 15 380 50 2900 4 2½ 1½ 260 550 305 71 115 112 110 108 102
SYT40/5E 18,5 380 50 2900 5 2½ 1½ 260 605 305 82 145 142 140 138 132
SYT40/6E 22 380 50 2900 6 2½ 1½ 260 660 305 92 175 172 170 168 162
SYT40/7E 30 380 50 2900 7 2½ 1½ 260 715 305 103 205 202 200 198 192
SYT40/8E 30 380 50 2900 8 2½ 1½ 260 770 305 113 235 232 230 228 222
SYT40/9E 37 380 50 2900 9 2½ 1½ 260 825 305 124 265 262 260 258 252
SYT40/10E 45 380 50 2900 10 2½ 1½ 260 880 305 134 295 292 290 288 282
SYT40/11E 45 380 50 2900 11 2½ 1½ 260 935 305 145 325 322 320 318 312
SYT40/12E 55 380 50 2900 12 2½ 1½ 260 990 305 155 355 352 350 348 342

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT50/E SERIES

  • SYT50/2E

SYT50/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 65 PN 16

OUTPUT FLANGE

:

DN 50 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 35 40 45 50
SYT50/2E 15 380 50 2900 2 3" 2" 330 493 370 80 Hm 72 65 60 50
SYT50/3E 18,5 380 50 2900 3 3" 2" 330 560 750 98 95 87 80 75
SYT50/4E 22 380 50 2900 4 3" 2" 330 627 370 116 120 110 100 85
SYT50/5E 30 380 50 2900 5 3" 2" 330 694 370 134 157 150 145 139
SYT50/6E 37 380 50 2900 6 3" 2" 330 761 370 152 200 192 182 170
SYT50/7E 45 380 50 2900 7 3" 2" 330 828 370 170 238 230 218 205
SYT50/8E 55 380 50 2900 8 3" 2" 330 895 370 188 268 260 250 236
SYT50/9E 75 380 50 2900 9 3" 2" 330 962 370 206 320 310 298 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








SYT65/E SERIES

  • SYT65/2E

SYT65/E SERIES

DESCRIPTION

Horizontal shaft multi-stage CASTING pumps with end-suction It is manufactured at frequencies of 50 Hz and 60 Hz.

FIELDS OF USAGE

These pumps lift the elbow losses from the centre, non-abrasive, non-hard or soft particles inside, low viscosity and low-density fluids. Besides, they are used in agricultural irrigation, pressurized water supply, boiler feed heating and cooling systems, industrial, water transfer stations, treatment plants, water booster systems, fire systems and clean water supply.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

GG25 DÖKÜM

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 45 ° C - 120 ° C

SEALING

:

YUMUŞAK SALMASTRA / MEKANİK SALMASTRA

INTAKE FLANGE

:

DN 80 PN 16

OUTPUT FLANGE

:

DN 65 PN 16

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW V Hz rpm STAGE
NUMBER		 INPUT OUTPUT W
mm		 L
mm		 H
mm		 KG m³/h 35 70 80 90
SYT65/2E 37 380 50 2900 2 4" 2½ 395 554 395 93 Hm 100 91 88 84
SYT65/3E 55 380 50 2900 3 4" 2½ 395 625 395 116 150 142 138 137
SYT65/4E 75 380 50 2900 4 4" 2½ 395 696 395 138 190 175 166 160
SYT65/5E 90 380 50 2900 5 4" 2½ 395 767 395 161 240 218 210 200
SYT65/6E 110 380 50 2900 6 4" 2½ 395 838 395 183 290 260 250 240
SYT65/7E 110 380 50 2900 7 4" 2½ 395 909 395 206 340 302 290 280

Optionally it can be produced as until 120⁰ C for use in hot water applications.

NOTE: Measurements and kg’s in the table are belongs only to pump. (Except motor and chassis)








sumak@sumakpompa.com

0262 502 50 10

About us

Sumak Pump, which was established in 1992 to manufacture water pumps, is a 100% Turkish-funded company that designs, manufactures, markets, sells and supports after sales activities on electric panels and electric panels as a 21.500 m² closed area water pumps and motors when it is day. In addition, SUMAK PUMP A.Ş. has gained corporate identity by transitioning to its title. With its competent engineer, technician, mechanist staff and 185 employees in total, Sumak Pump produces all of its products originally in its own production.

Adres : Çerkeşli OSB Mahallesi İMES-9 Cadde No:14 Dilovası/KOCAELİ

https://goo.gl/maps/JvUncD4cBQ12

444 11 62

0262 502 50 10

+90 (262) 502 50 15

sumak@sumakpompa.com


Your Opinions and Suggestions

*This part must be filled.