In general, the inverter feature is that it can adjust the speed between 0.5 and 2000 Hz. In other words, the inverter first rectifies the voltages in the networks, filters and cleans all voltage fluctuations, peaks and disrupting electrical fluctuations that occur in the network in capacitors and coils, which are intermediate circuit elements. In this way, the energy savings in the devices increase. Since they do not have inrush currents, they do not damage the network in any way and they do not work with the on/off system. They work at minimum and maximum intervals. For this reason, they are often used.

It works with a pressure transmitter that converts the pressure information integrated on the Frequency Controlled Boosters produced by turkish frequency controlled booster manufacturers into electrical information. The pressure transmitter transmits the pressure information it reads to the frequency control, and the driver accelerates or slows down according to this information, thus providing water pressure with less energy than traditional hydrophores.

Frequency-controlled water boosters manufactured by turkish frequency controlled water booster set producers , frequency-controlled booster systems that provide regular and continuous water at determined pressures, are suitable for schools, hospitals, workplaces, housing estates, hotels, etc. Suitable for use anywhere.

Frequency Controlled Hydrophore produced by turkish frequency controlled hydrphore suppliers  are electrically operated water pumps produced for the purpose of increasing the water pressure system. With the help of high pressure, the boosters deliver the water they absorb from a certain water reservoir to distant points. Due to the expansion tanks connected to the boosters, they already hold pressurized water.  Regarding the selection of frequency controlled booster set ,Hydrophores are used in buildings, apartments, detached villas, estates and high-rise buildings to meet the need for mains water or pressurized water from tanks in cases where the mains water pressure is not sufficient. In short, we can say that it is a water pressurization system used wherever the water pressure is insufficient. These systems, most of which work with electricity, increase the pressure of the water flowing from our taps.

Hydrophore with a driver is the name given to the pumps that are automatically activated in cases where the water booster is insufficient.

The selection of the booster pump with the driver should be completely tailored to the needs; It should be able to give the pressure to the water to go to the desired place. The booster is not only a system consisting of a water tank and a pump, but also has auxiliary elements mounted. We can count these auxiliary elements as follows; Expansion Tank, Manometer, Check Valve, Ball Valve, Pressure Switch, Control Panel and Water Level Floater.