This type of pumps due to have 5.5HP and 7.5HP, 1450RPM and 3” outlet, is extremely suitable in order to discharging of fluids up to max 18 meter and 1.5-2.5 kg/cm3 density. The system with stainless agitator which mounted the pump shaft reduces the fluid density; provides economic solutions in the discharging in constructions, backwaters, heavy septics, tunnel works, barrage works, mines and sand areas. Sumak Pump is one of the leaders of submersible pumps and mud water submersible pumps manufacturers in Tukey.  The models of slurry water submersible pumps and mud pumps manufacturing in Turkey are SDT50/3C and SDT75/3C


The Control panel which is given with 10meter cable and float switch, can stop the pumps sticks or blokages, burning of motors with the activations of thermic, phase failures, working without water. Also electric motors with the (L1-L2-L3) Energy signs on control panel has high efficiency and thermistor protection.

SLURRY WATER PUMPS

  • SDT75/3 C

SLURRY WATER PUMPS

DESCRIPTION

Casting body, three phase, agitator, internally cooled, 1450 rpm, control panel, thermistor protected slurry water submersible pumps.

FIELDS OF USAGE

This type of pump is equipped with a system that allows the pump shaft to be evacuated by reducing the density of the liquid by means of a mixer, used in the water evacuation, intensive septics, tunnel works, beach areas, marble and mine, construction excavations at water concentrations up to 1.5 / kg m³ - 2.5 / kg m³.

MATERIAL SPECIFICATIONS

PUMP BODY

:

GG25 DÖKÜM

IMPELLER

:

PASLANMAZ ÇELİK

AGITATOR

:

PASLANMAZ ÇELİK

AXLE

:

AISI 420

LIQUID PRESSURIZING TEMPERATURE

:

0 - 30 ° C

PROTECTION CLASS

:

IP 68

ISOLATION

:

CI.F

CABLE LENGTH

:

10 m

MECHANICAL SEAL

:

SİLİSYUM / SİLİSYUM

TYPE Panel Open Impeller Close Impeller Mixer Stainless
AISI 304 INOX
Cast Iron
Impeller GG25
Noryl Impeller
SDT50/3 C * *   * *    
SDT75/3 C * *   * *    

TECHNICAL SPECIFICATIONS

MOTOR PUMP
TYPE KW HP V Hz A rpm OUTPUT ø
mm
H
mm
KG m³/h 20 40 60 80 100
SDT50/3 C 4 5,5 380 50 9,5 1450 3" 360 880 130,5 Hm 12 10,5 8,5 5,5
SDT75/3 C 5,5 7,5 380 50 12 1450 3" 250 880 137,5 16 14,5 12,5 9,5 6

Optionally it can be produce with 4" output gland.








sumak@sumakpompa.com

0262 502 50 10