Centrifugal water pump manufactured by turkish hot water centrifugal pump producers inlets and outlets are manufactured to operate with single-phase and three-phase electricity, with 2900 cycles between 1 – 4 HP, in types ranging from 1” to 2.5 inches. Choosing the Inox Hot Water pump is very important in terms of choosing the one that suits your needs. Stainless hot water pumps, all surfaces in contact with water are made of 304 stainless (chrome) steel. This type of water pumps are used in the industry sector, 90°C hot water pump in the food sector in the industry, this type of stainless hot water pumps, which are suitable for evacuation of liquids, hot water mechanical seal, are also suitable for the evacuation of some foodstuffs and chemicals.

SMINOX/S Series Stainless Centrifugal Hot Water Pumps are manufactured by turkish stainless centrifugal pump suppliers  to be suitable for use in many different areas with a power of 1 – 4 HP with TSE certificate. Pumps are designed and manufactured in accordance with TS EN ISO 9908 standard. In the electric motor windings, F insulation class cables are used in accordance with TS 60085:2011. User and motor safety are prioritized by using a 2-pole asynchronous motor with IP 54 protection class in accordance with TS 3033 EN 60529.

Regarding the selection of  stainless centrifugal hot water pumps, which were started to be produced in order to offer the Stainless Hot Water Pump for use in hygienic environments and to carry our product range to stainless production, produce completely stainless steel for the surfaces in contact with the water. It is manufactured economically 100% domestically for needs up to a maximum height of 19 m. It is also produced for use in treatment plants, systems, hygienic environments such as food industry pumps, hospitals, transferring various chemicals, and as a food transfer pump.

As for the stainless steel centrifugal hot water pumps produced by turkish hot water stainless centrifugal pump manufacturers , these pumps consist of a vane impeller in a body, and the liquid enters the pump through a suction pipe. The path of the liquid in an Inox centrifugal water dynamo is as follows. Due to the vacuum created on the suction side of the impeller, the liquid enters between the blades of the impeller. Regarding the installation of stainless steel hot water centrifugal pumps , The fluid passing between the impeller blades gains a great tangential velocity with the rotational movements of the impeller. Between the impeller blades and the channels bounded by the front and rear profiles of the impeller, the liquid is pushed towards the exit side of the impeller by the centrifugal force that occurs during the rotational movement. The movement created in this way ensures the continuous flow of liquid and suction from the suction side of the pump. The kinetic energy contained in the liquid leaving the impeller blades with a great tangential velocity is converted into a pressure force in the volute cavity between the fixed diffuser blades. The highest pressure is achieved with a given rotational speed. This kind of pump can be said to be a hydrodynamic pump.