Water pump with blade, up to a maximum height of 28 m, can be evacuation smoothly by breaking up the fibrous and not very solid particles in the water thanks to the blade in its structure; Due to its stainless body, the pump with blade is conveniently suitable for use in industry, hotels, construction sector and sewage systems of residential areas, treatment plants. It is also known as crusher and grinder pumps.

The operating principle of the Septic Submersible Pump with blade produced by Turkish septic submersible water pump manufacturers is when the water in the area where it works reaches a certain level, the water level floater sends a signal to the panel and the septic pump operates, and when it is below the level, the septic pump turns off.

Waste water drainage pumps with shredder blades are a new design developed for use in solid, fibrous and particle-containing flow conditions and are a type of pump expected to have a longer life. With the cutting tips attached to the impeller and suction mouth of this pump, many solid particles are grinded and evacuation.

Septic Submersible Pumps With Blade manufactured by Turkish septic submersible pump producers  are manufactured with a power between 1.5 – 7.5 HP and are suitable for use in many different areas with TSE certificate. Septic submersible pumps with blades can be manufactured as polyurethane, stainless and cast iron body and also as septic submersible pump with stainless impeller, septic submersible pump with cast steel impeller, septic submersible pump with vortex impeller,  septic tank submersible pump with closed impeller with elevator float and suitable for use in narrow spaces

Pumps are designed and produced in accordance with TS 12599 standard. In the electric motor windings, F insulation class cables are used in accordance with TS 60085:2011. User and motor safety are prioritized by using a 2-pole asynchronous motor with IP 68 protection class in accordance with TS 3033 EN 60529.

Thanks to the shredder blade in the design of the Pumps, it can break the fibrous and not very solid particles in the water and evacuate it without any problems. It is generally used in the evacuation of domestic wastes, sewage systems of living spaces, treatment plants. The water pump with blade provides a quick solution to the problem caused by the problematic operation of the septic tank and sewerage expenses. In homes and workplaces, sewer systems work according to gravity.

The pumps with blade produced by turkish septic water pump with blade manufacturers  are specially designed pumps that allow solid particles to pass through without clogging the pump. When the pump is turned on, the motor starts turning the impeller and creates the pressure that pushes the water into the impeller and enters the evacuation pipe. Every possible information about the  Septic Submersible Pump with knife in the well should be try to used for monitoring and control purposes. User personnel should be informed about how to use devices such as the manometer at the well exit mouth, which can be used to obtain information about the electric motor and the state of the system, the electric control panel of especially high power submersible motors, the voltmeter and ammeter, which are used to monitor the current and voltage of each phase on it.

Turkey submersible pump with blade manufacturer / Turkey blade pump manufacturer / blade submersible pump company / blade pump / water pump with blade / submersible pump with blade / turkey water pumps with blade /