Centrıfugal pumps manufactured by turkish centrifugal pump producers ; In these pumps, which consist of a vane impeller (Impeller) in a body, the liquid is transmitted from an inlet to the middle of the impeller. The pressure is obtained by rotating the liquid with the impeller.

The working principle of the centrifugal pump produced by turksih centrifugal pump manufacturers is as follows. Due to the vacuum created on the suction side of the impeller, the liquid enters between the blades of the impeller. The fluid passing between the impeller blades gains a great tangential velocity with the rotational movements of the impeller. Between the impeller blades and the channels bounded by the front and rear profiles of the impeller, the liquid is pushed towards the outlet side of the impeller by the effect of centrifugal forces that occur during the rotational movement. The movement created in this way ensures the continuous flow of the liquid and the suction of the pump around the suction. The kinetic energy contained in the liquid leaving the impeller blades with a great tangential velocity is converted into pressure energy in the volute cavity between the fixed diffuser blades.

Centrifugal Water Pumps produced by turkish centrifugal pump suppliers  are machines that increase the energy or pressure of liquids. In this regard, pumps are used to send a liquid from low to high or from low pressure to high pressure.

Regarding the selection of the centrifugal pumps , ıt should be known , Centrifugal pumps are also used to increase the flow rate and therefore the flow rate of the liquid flowing in a pipe. Centrifugal water pump inlets and outlets are manufactured in types ranging from 1” to 6” inches, with power between 0.50 hp-130 HP, 1450 cycles and 2900 cycles.

Centrifugal Water pump installation is quite simple and easy. Centrifugal pump calculation and selection is very important in terms of choosing the appropriate one. The variables of the operating conditions that should be known in the selection of the centrifugal pump type are mainly as follows: The flow rate (Q) and the desired head (H) values at the operating point. The size and speed of the pump are determined from the pump selection curves. Other parameters such as efficiency, pump motor power and HPSH values of the selected pump are also read from the pump performance curves.

When choosing Centrifugal Pumps produced by turkish centrifugal pump manufacturers in turkey , it should be selected in accordance with the required flow rate and pipe resistance. When using speed-controlled pumps, always choose a pump whose duty point is as close to the best efficiency point as possible. There are often several alternatives and an important rule of thumb is to choose a pump that is within ±10% of the best efficiency point. When using a speed-controlled pump, the duty point should always be within 10% of the best efficiency point. This will ensure that there is a sufficiently large flow area to be able to adjust while regulating the pump.

If we talk to centrifugal water pumps produced by turkish centrifugal pump producers , these pumps consist of a vane impeller in a body, and the liquid enters the pump through a suction pipe. The path of the liquid in a centrifugal water dynamo is as follows. Due to the vacuum created on the suction side of the impeller, the liquid enters between the blades of the impeller. The fluid passing between the impeller blades gains a great tangential velocity with the rotational movements of the impeller. Between the impeller blades and the channels bounded by the front and rear profiles of the impeller, the liquid is pushed towards the exit side of the impeller by the centrifugal force that occurs during the rotational movement. The movement created in this way ensures the continuous flow of liquid and suction from the suction side of the pump. The kinetic energy contained in the liquid leaving the impeller blades with a great tangential velocity is converted into a pressure force in the volute cavity between the fixed diffuser blades. The highest pressure is achieved with a given rotational speed. This kind of pump can be said to be a hydrodynamic pump.